Netgear M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8*2.5G and 2x10G SFP+ Layer 3 소프트웨어 가이드

(NETGEAR Switch) #show management access-list

List Name...................................... mgmtacl

List Admin Mode................................ Disabled

Packets Filtered............................... 0

Rules:

permit ip-source 192.168.2.10 mask 255.255.255.255 service ssh priority 1

permit ip-source 192.168.2.182 mask 255.255.255.255 service ssh priority 2

permit ip-source 192.168.2.23 mask 255.255.255.255 service ssh priority 3

NOTE: All other access is implicitly denied.

This command displays information about the configured management ALC.

(NETGEAR Switch) #show management access-class

List Name...................................... mgmtacl

List Admin Mode................................ Disabled

Packets Filtered............................... 0

This section describes the commands you use to configure Hypertext Transfer Protocol 
(HTTP) and secure HTTP access to the switch. Access to the switch by using a Web browser 
is enabled by default. Everything you can view and configure by using the CLI is also 
available by using the web. 

Format

show management access-class

Mode

Privileged EXEC

List Name

The name of the management ACL

List Admin Mode

The administrative mode of the management ACL. To activate a management ACL, enter the 
management access-class

 command (see 

Packets Filtered

The number of packets filtered by the management ACL