Netgear M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8*2.5G and 2x10G SFP+ Layer 3 사용자 설명서
Multicast Routing
431
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure the Multicast Admin Boundary
The definition of an administratively scoped boundary is a mechanism to stop the ingress and
egress of multicast traffic for a given range of multicast addresses on a given routing
interface.
egress of multicast traffic for a given range of multicast addresses on a given routing
interface.
To configure the multicast admin boundary:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> Multicast > Admin Boundary Configuration.
6.
In the Interface list, select the router interface for which the administratively-scoped
boundary is to be configured.
7.
In the Group IP field, enter the multicast group address for the start of the range of
addresses to be excluded.
The address must be in the range of 239.0.0.0 through 239.255.255.255.
8.
In the Group Mask field, enter the mask to be applied to the multicast group address.
The combination of the mask and the group IP gives the range of administratively scoped
addresses for the selected interface.
addresses for the selected interface.
9.
Click the Add button.
The administratively scoped boundary is added.