Netgear M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8*2.5G and 2x10G SFP+ Layer 3 사용자 설명서
Manage Device Security
493
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure RADIUS Accounting Servers
To configure a RADIUS accounting server:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > Management Security > RADIUS > Accounting Server Configuration.
6.
In the Accounting Server IP Address field, specify the IP address of the RADIUS
accounting server.
7.
In the Accounting Server Name field, enter the name of the accounting server.
8.
In the Port field, specify the UDP port number the server uses to verify the RADIUS
accounting server.
The valid range is 0–65535. If the user has read-only access, the value is displayed but
cannot be changed.
cannot be changed.
9.
From the Secret Configured list, select Yes to add a RADIUS secret in the next field.
After you add the RADIUS accounting server, this field indicates whether the shared
secret for this server is configured.
10.
In the Secret field, type the shared secret to use with the specified accounting server.
11.
From the Accounting Mode list, enable or disable the RADIUS accounting mode.
12.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.