Netgear M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8*2.5G and 2x10G SFP+ Layer 3 사용자 설명서
Monitor the System
635
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The following table describes the Trap Log information displayed on the page.
View and Clear the Event Log
You can view and clear the event log, which contains error messages from the system. The
event log is not cleared on a system reset.
event log is not cleared on a system reset.
To view and clear the event log:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Monitoring > Logs > Event Logs.
Table 223. Trap Logs
Field
Description
Number of Traps Since Last
Reset
Reset
The number of traps that occurred since the switch last rebooted.
Trap Log Capacity
The maximum number of traps stored in the log. If the number of traps
exceeds the capacity, the entries overwrite the oldest entries.
exceeds the capacity, the entries overwrite the oldest entries.
Number of Traps since log
last viewed
last viewed
The number of traps that occurred since the traps were last displayed.
Displaying the traps by any method (terminal interface display, web display,
upload file from switch, and so on) causes this counter to be cleared to 0.
Displaying the traps by any method (terminal interface display, web display,
upload file from switch, and so on) causes this counter to be cleared to 0.
Log
The sequence number of this trap.
System Up Time
The time when this trap occurred, expressed in days, hours, minutes and
seconds, since the last reboot of the switch.
seconds, since the last reboot of the switch.
Trap
Information identifying the trap.