Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 사용자 설명서
Routing
308
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
IPv6 Static Route Configuration
Configure an IPv6 static route:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> IPv6 > Advanced > Static Route Configuration.
6.
In the IPv6 Prefix field, specify the IPv6 prefix for the configured route.
7.
In the Prefix Length field, specify the IPv6 prefix length for the configured route.
8.
In the Next Hop IPv6 Address Type list, select one of the following options:
•
Global IPv6 Address.
•
Link-Local
IPv6 address. If the next hop IPv6 address specified is a link-local IPv6
address, then specify the interface for the link-local IPv6 next hop address.
•
Static-Reject
. Select Static-Reject to create a static-reject route for a destination
prefix. No next hop address is specified in that case.
9.
Enter the Next Hop IPv6 Address for the configured route.
10.
Select from the Interface list to specify in unit/slot/port format, the link-local IPv6 next hop
address.
This field is enabled only if Link-Local is selected.
11.
Specify the route Preference of the configured route.
12.
Click the Add button.
The route is added.