Netgear FS728TPv2 - ProSAFE 24 Port 10/100 Smart Switch with 4 Gigabit Ports and 24 PoE Ports 관리자 가이드

Use the buttons at the bottom of the page to perform the following actions:

Click Clear to clear the messages out of the buffered log.

Click Refresh to refresh the page with the most current data from the switch.

Click Cancel to cancel the configuration on the screen and reset the data on the screen 

to the latest value of the switch.

Server Log Configuration

Use the Server Log Configuration page to allow the switch to send log messages to the 
remote logging hosts configured on the system.

To access the Server Log Configuration page, click the Monitoring 

 Logs tab, and then click 

the Server Log link.

To configure local log server settings:

Use the radio buttons in the Admin Status field to determine whether to send log 

messages to the remote syslog hosts configured on the switch.

: Messages will be sent to all configured hosts (syslog collectors or relays) 

using the values configured for each host.

: Stops logging to all syslog hosts. Disable means no messages will be sent 

to any collector/relay.

In the Local UDP Port field, specify the port on the switch from which syslog messages are 

sent. 

Click Apply to save the settings.

The Server Log Configuration area also displays the following information:

The Messages Relayed field shows the number of messages forwarded by the syslog 

function to a syslog host. Messages forwarded to multiple hosts are counted once for 
each host.