Netgear FS728TPv2 - ProSAFE 24 Port 10/100 Smart Switch with 4 Gigabit Ports and 24 PoE Ports 관리자 가이드
Chapter 2: Configuring System Information
|
59
FS728TP Smart Switch Software Administration Manual
To configure global LLDP settings:
1.
Configure the following LLDP properties.
•
TLV Advertised Interval
. Specify the interval at which frames are transmitted. The
default is 30 seconds, and the valid range is 1–32768 seconds.
•
Hold Multiplier
. Specify the number to use as the multiplier on the transmit interval to
assign to Time-to-Live (TTL). The default is 4, and the range is 2–10.
•
Reinitializing Delay
. Specify the delay before a reinitialization. The default is 2
seconds, and the range is 1–10 seconds.
•
Transmit Delay
. Specify the interval for the transmission of notifications. The default
is 5 seconds, and the range is 5–3600 seconds.
2.
To change the LLDP-MED properties in the Fast Start Duration field, specify the number of
LLDP packets sent when the LLDP-MED Fast Start mechanism is initialized, which occurs
when a new endpoint device links with the LLDP-MED network connectivity device. The
default value is 3, and the range is from 1–10.
3.
Click Apply to apply the new settings to the system.
4.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5.
Click Refresh to update the screen with the current information.
LLDP Port Settings
Use the LLDP Port Settings page to specify LLDP parameters that are applied to a specific
interface.
interface.
To display the LLDP Port Settings page, click System > LLDP > Advanced > LLDP Port
Settings
Settings
.