Netgear M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8*2.5G and 2x10G SFP+ Layer 3 하드웨어 매뉴얼

You can install the switch on a flat surface, attach it to a wall, attach it to a rectangular or 
round pole or table leg, or mount it in a standard 19-inch (48.26-centimeter) network 
equipment rack. 

The switch ships with four self-adhesive rubber footpads.



Stick one rubber footpad on each of the four concave spaces on the bottom of the switch. 

The rubber footpads cushion the switch against shock and vibrations. They also provide 
ventilation space between stacked switches.

The switch ships with a mount to which you can click-attach the back or bottom of the switch.



Attach the supplied mount to the wall, either vertically or horizontally, by doing the 

following:

a.  Place the mount on the wall where you want to mount the switch.

b.  Mark the wall where the two mounting holes are.

c.  Attach the mount to the wall using the M4 x L25 mm screws provided in the product 

package.

d.  Tighten the screws with a No. 2 Phillips screwdriver to secure the mount.

Click-attach the switch to the mount by doing the following:

a. Line up the back or bottom of the switch with the mount.

b.  Insert the mount’s locking tab and hook into the notches on the back or bottom of 

the switch.

c.  Slide the switch into the mount.