Netgear M4100-24G-POE+ (GSM7224P) - ProSAFE Gigabit L2+ Managed Switch 하드웨어 매뉴얼
Hardware Installation
21
NETGEAR Managed Switch
Note:
If the PD LED on the front panel of the M4100-D12G and
M4100-D12G-POE+ blinks green, port 1 is connected to a
IEEE802.3af PoE device. Check the PoE device specification to make
sure that it supports IEEE802.3at.
M4100-D12G-POE+ blinks green, port 1 is connected to a
IEEE802.3af PoE device. Check the PoE device specification to make
sure that it supports IEEE802.3at.
If the Power LED does not light up, check that the power cable is plugged in correctly and
that the power source is good. For more information, see
that the power source is good. For more information, see
SFP Modules
SFP modules (sold separately) can be inserted directly into the switch’s ports.
Note:
Use only optical transceiver modules that are UL approved and that
are certified as Laser class 1 products.
are certified as Laser class 1 products.
•
AGM731F: SFP module with LC connector, compatible with the IEEE 802.3z
1000Base-SX standard
•
AGM732F: SFP module with LC connector, compatible with the IEEE 802.3z
1000Base-LX standard
•
AFM735: SFP module with LC connector, compatible with the IEEE 802.3u 100Base-FX
standard
To insert an SFP module into the switch port:
1.
Insert the module into the switch port.
2.
Press firmly to ensure that the module seats into the connector.