Netgear M4100-24G-POE+ (GSM7224P) - ProSAFE Gigabit L2+ Managed Switch 소프트웨어 가이드
Switching Commands
182
M4100 Series ProSAFE
Managed
Switches
show port-security static
This command displays the statically locked MAC addresses for port.
show port-security violation
This command displays the source MAC address of the last packet discarded on a locked
port.
port.
LLDP (802.1AB) Commands
This section describes the command you use to configure Link Layer Discovery Protocol
(LLDP), which is defined in the IEEE 802.1AB specification. LLDP allows stations on an 802
LAN to advertise major capabilities and physical descriptions. The advertisements allow a
network management system (NMS) to access and display this information.
(LLDP), which is defined in the IEEE 802.1AB specification. LLDP allows stations on an 802
LAN to advertise major capabilities and physical descriptions. The advertisements allow a
network management system (NMS) to access and display this information.
lldp transmit
Use this command to enable the LLDP advertise capability.
no lldp transmit
Use this command to return the local data transmission capability to the default.
Format
show port-security static [lag <lag-intf-num> | <slot/port>]
Mode
Privileged EXEC
Term
Definition
MAC Address
MAC Address of statically locked MAC.
Format
show port-security violation [lag <lag-intf-num> | <slot/port>]
Mode
Privileged EXEC
Term
Definition
MAC Address
MAC Address of discarded packet on locked port.
Default
enabled
Format
lldp transmit
Mode
Interface Config
Format
no lldp transmit
Mode
Interface Config