Netgear EDA500 – ReadyNAS Expansion Chassis 5-Bay, Diskless 하드웨어 매뉴얼
Table 1. ReadyNAS 102 indicator descriptions
Description
Indicator
Press this button to turn on the ReadyNAS. The LED indicates these states:
•
On. Powered on.
•
Blinking. Booting or shutting down.
•
Off. Powered off.
Power button and LED
An LED on the front panel of the storage system is associated with each drive bay.
The disk LEDs have these states:
The disk LEDs have these states:
•
On. Power is on and the disk is operating normally.
•
Blinking. The disk was removed, failed, or is resynchronizing.
•
Off. The drive bay is empty.
Disk LEDs (1, 2)
The disk activity LED has these states:
•
On. At least one disk is present.
•
Blinking. A disk is active.
•
Off. No disks are present.
Disk activity LED
Two LED status indicators are built into this port, one green and one amber. They
indicate port speed and activity as follows:
indicate port speed and activity as follows:
•
Green on, amber off. 1000 Mbps connection speed, no activity.
•
Green blinking, amber off. 1000 Mbps connection speed, activity.
•
Green off, amber on. 10 Mbps or 100 Mbps connection speed, no activity.
•
Green off, amber blinking. 10 Mbps or 100 Mbps connection speed, activity.
•
Green off, amber off. No connection.
Rear panel Ethernet port
LEDs
LEDs
Power On and Shut Down
This section describes how to power on and shut down your system. If you must shut down the system, use
one of the preferred shutdown methods whenever possible.
one of the preferred shutdown methods whenever possible.
NETGEAR ReadyNAS 102
17
ReadyNAS OS 6.5