Netgear EDA500 – ReadyNAS Expansion Chassis 5-Bay, Diskless 하드웨어 매뉴얼
(Continued)
Backup LED
Disk 2 LED
Disk 1 LED
Power LED
Memory Test State
Off
Blinking
Off
On
Sixth hour
Off
Off
Blinking
On
Seventh hour
Blinking
Blinking
Blinking
On
Eigth hour
Blinking
Blinking
Blinking
Blinking
Result: fail
On
On
On
On
Result: pass
•
Test disk. Performs an offline full disk test. This process can take four hours or more, depending on
the size of your disks. Any problems are reported in the system logs. For more information about viewing
the system logs, see the ReadyNAS OS 6 Software Manual, which is available at
the size of your disks. Any problems are reported in the system logs. For more information about viewing
the system logs, see the ReadyNAS OS 6 Software Manual, which is available at
.
To access the boot menu:
1.
Power off your storage system.
2.
Using a straightened paper clip, press and hold the Reset button.
3.
Press the Power button.
The system powers on.
4.
Continue to press the Reset button until the Power button LED, USB and backup status LED, disk 1
LED, and disk 2 LED light.
LED, and disk 2 LED light.
5.
Press the Backup button to scroll through boot mode options.
The storage system shows the boot mode options using the LEDs, as described in the following table:
Status Indicator
Boot Mode
USB and
Backup
LED
Backup
LED
Disk 2
LED
LED
Disk 1
LED
LED
Power
LED
LED
Description
All four LEDs light.
Boot menu
Power LED lights.
Normal
Disk 1 LED lights.
Factory default
Disk 2 LED lights.
OS reinstall
USB and backup status LED lights.
Tech support
Power LED and disk 1 LED light.
Volume read only
NETGEAR ReadyNAS 212
53
ReadyNAS OS 6.5