Netgear EDA500 – ReadyNAS Expansion Chassis 5-Bay, Diskless 소프트웨어 가이드
Default LUN Settings
The following table explains the default settings of a LUN.You can change these settings when you create or change
the LUN.
the LUN.
Table 7. LUN default settings
Default State if Thin Selected
Default State
Item
Disabled
Disabled
Bit Rot Protection (Copy-on-write)
Enabled
Disabled
Compression
Never
Never
Snapshot Schedule
Allowed
Allowed
Sync Writes
N.a.
Thick
Provision
Manage LUNs
From the local admin page, you can create, modify, or delete a LUN.
Create a LUN
After you create a volume (see
on page 31), you can create LUNs on that volume.
The following procedure describes how to create a LUN from the Shares page. You can also create a LUN from the
iSCSI page.
iSCSI page.
On ReadyNAS 102, 104, and 2120 systems, individual LUNs cannot exceed 8 TB.
Note
To create a LUN:
1.
Log in to your ReadyNAS.
2.
Select iSCSI.
A list of shared folders and LUNs on each volume displays.
A list of shared folders and LUNs on each volume displays.
LUNs
93
ReadyNAS OS 6.4