Netgear AC329U – 3G USB Modem/HSPA+ 설치 가이드

Installation Guide

NETGEAR, the NETGEAR logo, and Connect with Innovation are 

trademarks and/or registered trademarks of NETGEAR, Inc. and/

or its subsidiaries in the United States and/or other countries. 

Information is subject to change without notice. © NETGEAR, 

Inc. All rights reserved. 

NETGEAR, Inc.
350 East Plumeria Drive, San Jose, CA 95134 USA

You can also insert a microSD card into the USB modem for mass storage.

To insert a microSD card into the USB modem:

Slide the back cover off the USB modem.

Insert a microSD card into the corresponding card slot in the USB modem.

Slide the back cover back onto the USB modem.

After installing your device, locate the serial number on the label of your product 

.

You must register your product before you can use NETGEAR telephone 
support. NETGEAR recommends registering your product through the 
NETGEAR website. 

NETGEAR recommends that you use only the official NETGEAR support 
resources.

You can get the user manual online at 

.

For the current EU Declaration of Conformity, visit

For regulatory compliance information, visit 

document before connecting the power supply.

Thank you for purchasing the AC329U 3G USB Modem. The dongle allows you 
to connect your computer to the Internet using a high-speed 3G network.

Before you can set up the USB modem, you must insert a SIM card into the 
USB modem.

To insert a SIM card into the USB modem:

Slide the back cover off the USB modem.

Insert a SIM card into the corresponding card slot in the USB modem.

Slide the back cover back onto the USB modem.

To set up the dongle, install the NETGEAR

®

 Aircard

®

 Mobile Broadband genie

®

 

on your computer using the Setup Wizard that is already installed in the USB 
modem.

Insert the USB modem into the USB port on a computer.
The Setup Wizard displays.

If the Setup Wizard does not display, browse the files on the USB 

modem and double-click AutoRun.exe.

Follow the onscreen instructions.