Netgear AirCard Hub 사용자 가이드
Get Started
Rev 1 Feb. 2012
19
Hardware Installation
1. Attach the supplied antennas to the ports marked “3G/4G ANTENNA”. [Attach in
a clockwise direction, as shown by the red arrow in the photo below.]
2. Turn the metal part to screw in the antenna until it tightens, then hold the metal
part while turning the antenna to a vertical position.
3. Connect the power adapter to the POWER socket on the back of the AirCard
Hub. Plug the power adapter into the wall socket. The WLAN and WWAN LEDs
blink for approximately 30 seconds while the AirCard Hub boots up.
4. Follow the instructions provided with your AirCard mobile hotspot to connect to
the Internet. Then dock the AirCard mobile hotspot into the AirCard Hub.
You are ready to use the AirCard Hub!
Note: Without the AirCard mobile hotspot, the AirCard Hub is not functional out of the box.