Netgear AirCard Hub 사용자 가이드
28
2400164
AirCard Hub User Guide
Power User
Power User mode also uses the settings on the docked mobile hotspot. In this mode,
however, you can also configure the basic wireless network settings, WAN port
function as well as in-depth configuration options for the AirCard Hub.
You can use the WAN port to connect the AirCard Hub to an ADSL modem or other
You can use the WAN port to connect the AirCard Hub to an ADSL modem or other
xDSL device to provide access to the Internet.
Figure 6: Power User – Basic Status Page
Note: In Power User mode, the wireless network SSID of the AirCard Hub is the AirCard mobile
hotspot’s SSID with ‘-C’ or ‘_C’ added at the end. The IP Address assigned to the AirCard
Hub
is based on the AirCard
mobile hotspot’s IP address, with the subnet incremented by 1.
Connecting to this wireless network provides access to the attached USB storage devices.
Internet access is provided by the docked AirCard mobile hotspot. If the AirCard mobile
hotspot is undocked, Internet access is available by connecting to the AirCard mobile
hotspot’s SSID. Alternatively, LAN1/WAN port can be configured as WAN port to connect to
an ADSL modem or other xDSL device.