Netgear AirCard 803S (Sprint) – 4G LTE Tri-Fi Hotspot 사용자 가이드
Location Services and Settings
126
Changing Your Mapping Service
You can change the mapping service (for example, Google Maps or MapQuest) that displays
the GPS results (in a separate browser window).
the GPS results (in a separate browser window).
1. Make sure you’re logged in to the home page.
2. Click the GPS icon
on the left side of the home page.
3. Click a service in the Mapping service list in the GPS Information and Settings window.
Performance Setting: GPS
The performance setting determines the amount of time the device waits for a satellite to be
discovered when obtaining GPS information.
discovered when obtaining GPS information.
1. Log in to the home page.
2. Click Advanced settings > WAN > GPS.
3. In the Performance Value section, select one of the following:
Automatic — The device automatically determines the most appropriate setting to
use.
Manual — In the input field, enter the number of seconds the device should wait for
a satellite to be discovered. If this time is exceeded, an error is reported.
Accuracy
The accuracy setting determines how accurate the location information is.
1. Log in to the home page.
2. Click Advanced settings > WAN > GPS.
3. In the Accuracy section, select one of the following:
Automatic — The device automatically determines the most appropriate setting to
use.
Manual — In the input field, enter the number of meters to which the data must be
accurate. Note: If the value is very small (that is, very high accuracy), the fix may fail.