Netgear AirCard 803S (Sprint) – 4G LTE Tri-Fi Hotspot 사용자 가이드
Troubleshooting
152
WPS Failed. WPS could not add the device to the network
If the LCD of your Sierra Wireless 4G LTE Tri-Fi Hotspot displays this message, the device you
are trying to connect may not be WPS-enabled. Use the manual method to connect the W-Fi
device to your Wi-Fi network, as described in
are trying to connect may not be WPS-enabled. Use the manual method to connect the W-Fi
device to your Wi-Fi network, as described in
WPS Not Available. WPS feature not enabled
If the LCD of your Sierra Wireless 4G LTE Tri-Fi Hotspot displays this message, go through the
following steps.
following steps.
1. Click WPS (below the Virtual Device).
2. In the WPS Setup window, select Enable.
3. Click Save.
4. Retry the WPS process.
WPS Not Available. SSID Broadcast disabled
If the LCD of your Sierra Wireless 4G LTE Tri-Fi Hotspot displays this message, go through the
following steps.
following steps.
1. Click Advanced settings (
).
2. Click Wi-Fi > Network.
3. Set SSID Broadcast to Enable.
4. Click Save.
5. Retry the WPS process.
6. After you’ve finished using WPS, for security reasons it’s recommended you change
SSID Broadcast back to Disable.
WPS Not Available. Wi-Fi currently disabled
If the LCD of your Sierra Wireless 4G LTE Tri-Fi Hotspot displays this message, go through the
following steps.
following steps.