Netgear AirCard 810 Retail unlocked – AC810 Mobile Hotspot 사용자 설명서
Advanced Settings
90
AirCard 810 Mobile Hotspot
The Submit button displays after you make a selection.
9.
Click the Submit button.
Your settings are saved.
Enable IP Pass-Through Mode
To turn off the mobile hotspot router functionality and assign the network IP address directly
to the attached device, enable IP pass-through.
to the attached device, enable IP pass-through.
If you make this change, the attached device restarts using a different driver configuration.
WARNING:
If you enable this feature, WiFi is disabled and you must use a USB
cable to tether the device.
cable to tether the device.
Note:
This feature is available to Windows computer users. If you are a Mac
user, do not enable this option because you will be unable to access
your device.
user, do not enable this option because you will be unable to access
your device.
To enable IP pass-through mode:
1.
From a computer or WiFi device that is connected to your network, launch an Internet
browser.
browser.
2.
Enter http://netgear.aircard or http://192.168.1.1.
Your device might use a different web address. To get the web address for your device,
tap Settings > More > Device Information > AC810S Manager or look at the label
under the device battery.
tap Settings > More > Device Information > AC810S Manager or look at the label
under the device battery.
A login window opens.
3.
Enter the administrator login password.
The default password is password. The password is case-sensitive.
The home screen displays.
4.
Select Settings > Router > Basic.
The Basic page displays.
5.
In the LAN section, select the IP Passthrough Mode Enabled radio button.
6.
Click the Submit button.
Your settings are saved.