Netgear AirCard 778S (Virgin Mobile) – NETGEAR® MINGLE™ Mobile Hotspot 사용자 가이드

c.  Enter your device’s PIN. 

d.  Click Submit. 

Your NETGEAR Mingle Mobile Hotspot and the wireless device will communicate and establish 
the connection. If no problems are encountered, the message “The device can now access your 
hotspot” displays. If your device does not connect, the message “No device was connected …” 
displays – try to connect it manually. (See 

) 

Note:  If you want to stop the pairing process, click Cancel. 

Use the micro-USB cable (included) to connect your device to your computer. 

 

Note:   If you’ll be using USB to connect to the Internet (and not just for charging your device), 
you must install the device driver. (See 

.) 

Use the micro-USB cable when: 

● 

You want to charge your device, but you don’t want to use the AC charger, or the AC 
charger is not available. 

● 

Your computer does not have Wi-Fi. 

● 

You want to prevent any other devices from using the hotspot. (See 

.) 

Note:  You can also block individual devices. See 

 and 

. 

To connect your device to your computer: 

1.  Insert the larger (Type A) end of the micro-USB cable into your computer. 

2.  Insert the other end of the cable into the micro-USB port on the side of your device. 

Your Network Connection 

26