Netgear AirCard 790 Retail unlocked – AC790 Mobile Hotspot 사용자 설명서

If your hotspot cannot automatically detect a mobile broadband 
network, you might need to enter an access profile name (APN) 
profile. For information on entering a APN profile manually, see 

85.

Connect your computer or other device to your WiFi network:

a. Make sure that WiFi is enabled on your device and search for available WiFi 

networks. 

b.  Select the WiFi name displayed on the hotspot touch screen and connect to it.

c.  When prompted, enter your WiFi password as it displays on the hotspot touch 

screen.

Launch your browser to surf the Internet.

You can personalize the hotspot and change its settings using the following methods:

Touch screen. Use the touch screen to make basic WiFi and other settings changes.

Web pages. Use the hotspot web pages to make more detailed settings changes than 
the basic settings changes offered on the touch screen.

Use a WiFi-enabled device to connect to the hotspot and then use a browser to display 
the hotspot web pages (

http://192.168.1.1

). 

Your device might use a different web page address. To get the web 
page address for your device, tap Settings > More > Device 
Information > AC790 Manager or look at the label underneath the 
device battery.

Log in as an administrator to make changes. The default administrator login password is 
password. NETGEAR recommends setting a more secure password.

The following topics are covered in this section: