Netgear AirCard 790 Retail unlocked – AC790 Mobile Hotspot 사용자 설명서
Advanced Settings
84
AirCard 790S Mobile Hotspot
The Submit button displays after you make a selection.
9.
Click the Submit button.
Your settings are saved.
Enable IP Pass-Through Mode
To turn off the hotspot router functionality and assign the network IP address directly to the
attached device, enable IP pass-through.
attached device, enable IP pass-through.
If you make this change, the attached device restarts using a different driver configuration.
WARNING:
If you enable this feature, WiFi is disabled and you must use a USB
cable to tether the device.
cable to tether the device.
Note:
This feature is available to Windows computer users. If you are a Mac
user, do not enable this option because you will be unable to access
your device.
user, do not enable this option because you will be unable to access
your device.
To enable IP pass-through mode:
1.
From a computer or wireless device that is connected to your network, launch an
Internet browser.
Internet browser.
2.
Enter http://netgear.aircard or http://192.168.1.1.
Your device might have a different web page address. To get the web page address for
your device, tap Settings > More > Device Information > AC790 Manager or look at the
label underneath the device battery.
your device, tap Settings > More > Device Information > AC790 Manager or look at the
label underneath the device battery.
A login screen displays.
3.
Enter the administrator login password.
The default password is admin. The password is case-sensitive.
The Home screen displays.
4.
Select Settings > Router > Basic.
The Basic page displays.
5.
In the LAN section, select the Enabled radio button next to IP Passthrough Mode.
6.
Click the Submit button.
Your settings are saved.