Netgear AirCard 754S (Rogers) 사용자 가이드

Sierra Wireless Mobile Hotspot User Guide

12

 2400159

The blue LED on the top of the mobile hotspot flashes:

Slowly to indicate that it is powered on

Quickly when the firmware is being updated 

Depending on your service provider, the following accessories may be included:

Micro USB cable — Used mainly for recharging the battery, although you can 
also use it to tether the mobile hotspot to your computer

AC adapter — Used with the USB cable to recharge the battery or to power 
the mobile hotspot from a wall socket 

Charging cradle

Alerts / Messages
You have alerts / messages. To view your alerts, go to the homepage 
and click the Alerts / Messages icon.

GPS
When the GPS icon flashes, the mobile hotspot is trying to obtain a 
satellite fix or is tracking a location.

Wi-Fi users
The number beside the Wi-Fi icon shows the number of users (devices) 
connected to your Wi-Fi network.

Wi-Fi radio is disabled. 
You can enable Wi-Fi on the device homepage. See page 



Battery status
Indicates the charge status of the battery. 
4  bars   — 80 – 100% 
1 bar  —  10 – 29%

Battery outline (no bars)  — 0 – 9%



 Recharge  immediately.

Battery charging 

No battery



The mobile hotspot is powered on and connected to the AC charger.

The battery is charging through a USB connection.

The exclamation mark (!) in the battery outline indicates that the battery 
is not recharging because the device is too hot to charge. 
Make sure there is room for air to circulate around the device. If the 
problem persists, move the device to a cooler environment.