Netgear AirCard 801S (Clear 4G) – Clear Spot 4G plus for Clear 사용자 가이드

Clear Spot 4G+ User Guide

116

2131352

Check the system events log. See 

.

If some settings are preventing you from connecting to Wi-Fi, connect to the 
device through the USB cable, and then change the settings. See 

Go to  

 to access troubleshooting and other 

resources.

The knowledge base at the Sierra Wireless website (

) may also be useful.

The LCD is dark and is not displaying any text or icons if:

The device is turned on and:
· The LCD is turned off (

Advanced settings > Device > Display > LCD Backlight

).

· The LCD is turned on, but the LCD is dormant (inactivity timeout). To make 

the LCD active, briefly press the power button 

 on the device.

· The device is in standby (low power) mode. To exit this mode, briefly press 

the power button 

 on the device.

The device is turned off.

To turn the device on:

Ensure a battery is inserted into the device.

b. Press the power button 

 on the device for approximately two seconds.

If the LCD is still dark, use the USB cable to connect the device to the power 
adapter or to a computer.

If you have insufficient signal strength, the icon 

 is displayed (on the left side 

of the home page).

Insufficient signal strength may occur because:

You are outside the network coverage area.

Your device’s internal antenna is pointing in the wrong direction.

You are in or near a structure that is blocking the signal.

You are near a device that is causing radio signal interference.

A network or account problem is preventing you from obtaining service.

See also