Netgear AirCard 801S (Clear 4G) – Clear Spot 4G plus for Clear 사용자 가이드
Rev 1.0 Apr.10
37
3
3: Installing and Setting Up the Device
Setting Up the Device
1.
Install the battery, as described in
2.
3.
Plug the AC charger into an electrical outlet.
4.
Important:
Charge the device until the battery icon is full (
).
Connecting to the Network
1.
Ensure you are in the CLEAR 3G or 4G coverage area.
2.
If you have a LAN connection, disconnect it.
3.
Ensure your computer's Wi-Fi is turned on.
4.
If the device LCD displays "Charging", "Charged", or "Powered
off", press and hold the power button
for two seconds.
5.
Wait until the device LCD displays "Connect your computer to
Wi-Fi network," followed by the network name (SSID) and
password. This may take several seconds.
Wi-Fi network," followed by the network name (SSID) and
password. This may take several seconds.
6.
On your computer, connect to the Wi-Fi network listed on the
device LCD. If you don't know how to do this, see
device LCD. If you don't know how to do this, see
. After you’ve connected to the
Wi-Fi network, the device LCD displays "Open any web page to
continue setup."
continue setup."
7.
Open your Web browser. The "Welcome to your Clear Spot 4G+"
window opens.
window opens.
Note: This window displays the administrator password and the address of
the device home page. Please remember this information or write it down in a
safe place.
the device home page. Please remember this information or write it down in a
safe place.