Netgear AirCard 801S (Clear 4G) – Clear Spot 4G plus for Clear 사용자 가이드
Clear Spot 4G+ User Guide
80
2131352
Log Panel
1.
Log in to the home page.
2.
Click
Advanced settings
(
).
3.
Click
Device > Log
.
From this window, you can:
•
Enable logging of system events. See
.
•
Enable logging of connects/disconnects. See
•
Export logs. See
and
•
Clear logs. See
and
•
Set the method used for time acquisition. See
.
WAN Tab
See also
Setup Panel
1.
Log in to the home page.
2.
Click
Advanced settings
(
).
3.
Click
WAN > Setup
.
From this window, you can view and adjust settings, or perform the following
actions:
actions:
•
Active Network
— Network that is currently being used for your data
connection: 3G, 4G, or none.
•
Network Operator.
The carrier that your device was activated for.
•
Session Duration
— How long you've been connected to the network.
•
Session Total Data
— Amount of data transferred over the lifetime of the device
(by network type) and in the current session.
•
WAN Mode
— Network(s) to connect to, and in what order.
·
4G Preferred
— Connection can be established to either 3G or 4G; if both
are available, 4G is used. This setting is recommended if your service
provider has no data limit for 4G, but does for 3G, or you want to take
advantage of the faster data transfer speeds of 4G.
provider has no data limit for 4G, but does for 3G, or you want to take
advantage of the faster data transfer speeds of 4G.
·
4G Only
— Connection can be established only to 4G.
·
3G Only
— Connection can be established only to 3G.
If you don’t have 4G coverage, you can save power by selecting "3G Only".