Netgear AirCard 598U (Sprint) 사용자 가이드
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
Section 14D, The Hardware Tab 142
S
m
a
rtView
Se
tt
ings
Use the Roam Guard pull-down menu to specify whether you would like Sprint SmartView
to display a warning message when you are about to connect to a roaming network for
which there may be additional roaming charges.
to display a warning message when you are about to connect to a roaming network for
which there may be additional roaming charges.
●
When Always Ask is selected, Sprint SmartView will always display the warning
message when connecting to a roaming network.
message when connecting to a roaming network.
●
When Never Ask is selected, Sprint SmartView will never display the warning
message.
message.
●
When Default is selected, Sprint SmartView will display the warning message only
when connecting to an international roaming network.
when connecting to an international roaming network.
Mode
This menu allows you to specify which technology will be used to establish Mobile
Broadband data connections.
Broadband data connections.
●
Automatic: Sprint SmartView will automatically select the best fit for your Mobile
Broadband device.
Broadband device.
●
CDMA 1xRTT: Comparable to a Sprint Vision
®
connection.
●
CDMA EVDO: Comparable to a Sprint Power Vision
®
connection.
Connection Type
This setting determines which software interface Sprint SmartView should use to
communicate with your Mobile Broadband device.
communicate with your Mobile Broadband device.
●
NDIS allows more efficient communication with devices that support it.
●
RAS is supported by more devices.
NDIS also has an automatic connection feature. See “Automatic Connection for NDIS
Devices” on page 39 for more information.
Devices” on page 39 for more information.
Note
Many Mobile Broadband devices support only one of these interfaces. If this is the case
with your device, the interface that your device supports will be selected by default and
you will not be able to change the selection.
with your device, the interface that your device supports will be selected by default and
you will not be able to change the selection.