Netgear DC112A (Zain) – Zain Smart Cradle 사용자 설명서
Control Internet Access
39
AirCard Smart Cradle
5.
Leave the Port Forwarding radio button selected as the service type.
6.
In the table, select the radio button next to the service name.
7.
Click the Edit Service button.
The Ports - Custom Services screen displays.
8.
Change the settings as needed:
9.
Click the Apply button.
Your changes are saved.
Delete a Port Forwarding Entry
To delete a port forwarding entry:
1.
Launch a web browser from a computer or wireless device that is connected to the
Smart Cradle.
Smart Cradle.
2.
In the address field of the browser, enter http://zain.cradle or http://192.168.100.1.
A login prompt displays.
3.
Enter the cradle user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering screen displays.
5.
Select the Port Forwarding radio button as the service type.
6.
In the table, select the radio button next to the service name.
7.
Click the Delete Service button.
The service is deleted.
Application Example: Make a Local Web Server Public
If you host a web server on your local network, you can use port forwarding to allow web
requests from anyone on the Internet to reach your web server.
requests from anyone on the Internet to reach your web server.
To make a local web server public:
1.
Assign your web server either a fixed IP address or a dynamic IP address using DHCP
address reservation.
In this example, your cradle always gives your web server an IP address of
192.168.100.33.
192.168.100.33.
2.
In the Port Forwarding/Port Triggering screen, configure the cradle to forward the HTTP
service to the local address of your web server at 192.168.100.33.
service to the local address of your web server at 192.168.100.33.