Netgear R7100LG - Nighthawk 4G LTE Modem Router 설치 가이드

Quick Start

Model R7100LG

IMPORTANT: 

Make sure that the modem router is powered off before inserting a 

micro SIM card. 

Insert the micro SIM card into the SIM slot on the back of the modem router.
The modem router does not support SIM hot-swapping. If you want to change 
the micro SIM card, power off the modem router before changing the  
micro SIM card.
You can also connect your modem router to a cable or DSL modem. For more 
information, see the Do More booklet or the user manual. The user manual is 
available online at 

.

Connect the modem router to a power source. 
The modem router’s Power LED 

 lights amber and then turns white when the 

modem router is ready. 

Attach and tighten the antennas on the threaded antenna posts.
Position the antennas as shown.

You can either use an Ethernet cable or connect with WiFi to the modem router.
To connect with WiFi:

Make sure that the modem router’s WiFi LED 

 is lit. Find the 

modem router’s preassigned WiFi network name and password on the label 
on the modem router. 

Open the WiFi connection manager on your WiFi-enabled computer or 
mobile device find the modem router’s WiFi network name, and use the 
modem router’s password to connect.

Launch a web browser. If the NETGEAR installation assistant does not display, 
visit 

. If a login window opens, enter 

admin for the user 

name and 

password for the password.

Follow the NETGEAR installation assistant. The 3G/4G LED lights when the 
installation is complete.

45°

45°

45°

The 3G/4G LED on your modem router indicates your modem router’s mobile 
broadband signal strength.
For more information about the 3G/4G LED behavior, see the Do More booklet 
or the user manual, which is available online at 

.