Netgear MBR1200 - HSPA+ Mobile Broadband Wireless Router 사용자 설명서

Change the wireless network name (SSID) to a meaningful name.

On the WPA/PSK + WPA2/PSK screen, select a passphrase.

Make sure that the Keep Wireless Settings check box is selected in the WPS 

Settings screen so that your new settings will not be erased if you use WPS.

Click Apply so that your changes take effect. Write down your settings.

All existing wireless clients are disassociated and disconnected from the router.

For the non-WPS devices that you want to connect, open the networking utility and follow 

the utility’s instructions to enter the security settings that you selected in Step 3 (the SSID, 

WPA/PSK + WPA2/PSK security method, and passphrase).

For the WPS devices that you want to connect, follow the procedure 

page 31 or 

The settings that you configured in Step 3 are broadcast to the WPS devices so that they 
can connect to the router.