Netgear MBR1200 - HSPA+ Mobile Broadband Wireless Router 사용자 설명서
Chapter 5: Advanced
|
73
Mobile Broadband 11n Wireless Router MBR1000 User Manual
The router delivers the following parameters to any LAN device that requests DHCP:
•
An IP address from the range you have defined.
•
Subnet mask.
•
Gateway IP address is the router’s LAN IP address.
•
Primary DNS server, if you entered a primary DNS address in the Basic Settings screen;
otherwise, the router’s LAN IP address.
•
Secondary DNS server, if you entered a secondary DNS address in the Basic Settings
screen.
•
WINS server (Windows Internet Naming Service Server) determines the IP address
associated with a particular Windows computer. A WINS server records and reports a list
of names and IP address of Windows PCs on its local network. If you connect to a remote
network that contains a WINS server, enter the server’s IP address here. This allows your
PCs to browse the network using the Network Neighborhood feature of Windows.
of names and IP address of Windows PCs on its local network. If you connect to a remote
network that contains a WINS server, enter the server’s IP address here. This allows your
PCs to browse the network using the Network Neighborhood feature of Windows.
Reserved IP Addresses
When you specify a reserved IP address for a computer on the LAN, that computer always
receives the same IP address each time it access the router’s DHCP server. Reserved IP
addresses should be assigned to servers that require permanent IP settings.
receives the same IP address each time it access the router’s DHCP server. Reserved IP
addresses should be assigned to servers that require permanent IP settings.
To reserve an IP address:
1.
Click the Add button.
2.
In the IP Address field, type the IP address to assign to the computer or server. Choose an
IP address from the router’s LAN subnet, such as 192.168.0.x.
3.
Type the MAC address of the computer or server.
Tip:
If the computer is on your network, it is listed on the same screen for
your convenience. Clicking the radio button for each entry in the attached
device list fills in the fields automatically with the computer’s MAC
address and name.
device list fills in the fields automatically with the computer’s MAC
address and name.
4.
Click Apply to enter the reserved address into the table.
Note:
The reserved address will not be assigned until the next time the
computer contacts the router’s DHCP server. Reboot the computer
or access its IP configuration and force a DHCP release and renew.
or access its IP configuration and force a DHCP release and renew.
To edit or delete a reserved address entry:
1.
Click the button next to the reserved address you want to edit or delete.
2.
Click Edit or Delete.