Netgear DC112A – AirCard Smart Cradle 사용자 설명서
Supplemental Information
154
AirCard Smart Cradle
Factory Settings
You can return the AirCard Smart Cradle its factory settings. Use the end of a paper clip or a
similar object to press and hold the Reset button on the back of the AirCard Smart Cradle for
at least seven seconds. The AirCard Smart Cradle resets and cradle returns to the factory
configuration settings shown in the following table. When the AirCard Smart Cradle restarts,
all LEDs on the front panel light.
similar object to press and hold the Reset button on the back of the AirCard Smart Cradle for
at least seven seconds. The AirCard Smart Cradle resets and cradle returns to the factory
configuration settings shown in the following table. When the AirCard Smart Cradle restarts,
all LEDs on the front panel light.
Table 3. Factory default settings
Feature
Default behavior
Smart Cradle
login
login
User login URL
netgear.cradle or http://192.168.100.1
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
connection
connection
WAN MAC address
Use default hardware address
WAN MTU size
1500
Port speed
AutoSensing
Local network
(LAN)
(LAN)
LAN IP
http://192.168.100.1
Subnet mask
255.255.255.0
DHCP server
Enabled
DHCP range
192.168.100.2 to 192.168.100.254
Time zone
Pacific time
DHCP starting IP address
192.168.100.2
DHCP ending IP address
192.168.100.254
DMZ
Disabled
Time zone
GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA, GMT+10 for AU
for NA, GMT+10 for AU
Time zone adjusted for daylight
saving time
saving time
Disabled
SNMP
Disabled
Firewall
Inbound (communications coming
in from the Internet)
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
out to the Internet)
Enabled (all)
Source MAC filtering
Disabled