Netgear DC112A – AirCard Smart Cradle 사용자 설명서
Control Internet Access
56
AirCard Smart Cradle
7.
Click the Add Custom Service button.
8.
In the Service Name field, enter a descriptive name.
9.
In the Protocol list, select the protocol.
If you are unsure, select TCP/UDP.
10.
In the External Port Range field, enter the port range.
If the application uses a single port, enter that port number.
11.
Specify the internal ports by one of these methods:
•
Leave the Use the same port range for Internal port check box selected.
•
Type the port numbers in the Internal Port Range fields.
12.
In the Internal IP address field, type the IP addressor select the radio button for an attached
device listed in the table.
device listed in the table.
13.
Click the Apply button.
The service is now in the list on the Port Forwarding/Port Triggering screen.
Edit a Port Forwarding Service
To edit a port forwarding entry:
1.
Launch a web browser from a computer or wireless device that is connected to the
Smart Cradle.
Smart Cradle.
2.
In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.
A login prompt displays.
3.
Enter the cradle user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering screen displays.