Netgear DC112A – AirCard Smart Cradle 사용자 설명서
Network Settings
83
AirCard Smart Cradle
The name can be up to 32 characters long and it is case-sensitive. The default SSID is
randomly generated and is on the cradle’s label. If you change the name, make sure to
write down the new name and keep it in a safe place.
randomly generated and is on the cradle’s label. If you change the name, make sure to
write down the new name and keep it in a safe place.
8.
To change the wireless channel, select a number in the Channel list.
In some regions, not all channels are available. Do not change the channel unless you
experience interference (shown by lost connections or slow data transfers). If this
happens, experiment with different channels to see which is the best.
experience interference (shown by lost connections or slow data transfers). If this
happens, experiment with different channels to see which is the best.
When you use multiple access points, it is better if adjacent access points use different
channels to reduce interference. The recommended channel spacing between adjacent
access points is four channels (for example, use Channels 1 and 5, or 6 and 10).
channels to reduce interference. The recommended channel spacing between adjacent
access points is four channels (for example, use Channels 1 and 5, or 6 and 10).
9.
Click the Apply button.
Your settings are saved.
If you connected wirelessly to the network and you changed the SSID, you are
disconnected from the network.
disconnected from the network.
10.
Make sure that you can connect wirelessly to the network with its new settings.
If you cannot connect wirelessly, check the following:
•
Is your computer or wireless device connected to another wireless network in your
area? Some wireless devices automatically connect to the first open network without
wireless security that they discover.
area? Some wireless devices automatically connect to the first open network without
wireless security that they discover.
•
Is your computer or wireless device trying to connect to your network with its old
settings (before you changed the settings)? If so, update the wireless network
selection in your computer or wireless device to match the current settings for your
network.
settings (before you changed the settings)? If so, update the wireless network
selection in your computer or wireless device to match the current settings for your
network.
Change the WiFi Data Speed Rate Settings
The data rate for high-speed transmissions is commonly specified in megabits per second
(Mbps). By default, the cradle is set to operate with up to 600 Mbps in the 2.4 GHz WiFi band
and up to 1,300 Mbps in the two 5 GHz WiFi bands. You can select slower settings.
(Mbps). By default, the cradle is set to operate with up to 600 Mbps in the 2.4 GHz WiFi band
and up to 1,300 Mbps in the two 5 GHz WiFi bands. You can select slower settings.
To change the WiFi Mbps settings:
1.
Launch a web browser from a computer or wireless device that is connected to the
Smart Cradle.
Smart Cradle.
2.
In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.
A login prompt displays.
3.
Enter the cradle user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home screen displays.