Netgear MBR1310 사용자 설명서

Show Statistics

Click the Show Statistics button on the Router Status screen to display router usage 
statistics:

The following table explains the statistic fields.

Wireless Port

 

(See 

Name (SSID)

The service set ID, also known as the wireless network name.

Region

The country where the unit is set up for use.

Channel

The current channel, which determines the operating frequency.

Mode

The current mode, which determines the maximum data speed.

Wireless AP

Indicates if the access point feature is disabled or not. If not 
enabled, the Wireless LED on the front panel is off.

Broadcast Name

Indicates if the router is configured to broadcast its SSID.

Wireless Isolation

Indicates whether wireless isolation is enabled or disabled.

Wi-Fi Protected 
Setup

Indicates status of the Wi-Fi Protected Setup.

Status

The link status. Note that LAN2, LAN3, and LAN4 are guest networks.

TxPkts

The number of packets transmitted on this port since reset or manual clear.

RxPkts

The number of packets received on this port since reset or manual clear.

Collisions

The number of collisions on this port since reset or manual clear.

Tx B/s

The average egress line utilization for this port.

Rx B/s

The average ingress line utilization for this port.

Up Time

The time elapsed since the last power cycle or reset.