Netgear MBR1310 사용자 설명서

Advanced Wireless Settings

From the main menu under Advanced, select Advanced Wireless Settings to display the 
following screen:

Wireless Station Access Control

By default, any wireless computer that is configured with the correct SSID and wireless 
security settings is allowed access to your wireless network. You can use wireless access 
point settings in the Wireless Settings and Advanced Wirelless Settings screens to further 
restrict wireless access to your network:

Enable Wireless Router Radio

Selected by default, this setting enables the wireless radio, which 
allows the router to work as a wireless access point.

Turning off the wireless radio can be helpful for configuration, 
network tuning, or troubleshooting. 

Fragmentation Length, CTS/RTS 
Threshold, and Preamble Mode

These should be left at their default settings.

Router PIN

The PIN number used for Push 'N' Connect.

Disable Router PIN

By default, this check box is cleared. This allows the WPS clients to 
discover the router’s PIN.

Keep Existing Wireless Settings

By default, this check box is cleared. This allows the router to 
automatically generate the SSID and WPA/WPA2 security settings 
when it implements WPS. After WPS is implemented, the router 
automatically selects the Keep Existing Wireless Settings check 
box so that your SSID and wireless security settings remain the 
same if other WPS-enabled devices are added later.