Netgear MBR1310 사용자 설명서

Configure Remote Management



Log in to the router. Type http://www.routerlogin.net in the address field of your 
Internet browser. Enter admin

 for the user name and your password (or the default, 

)

.

Under Advanced, select Remote Management:

Select the Turn Remote Management On 
check box.

Specify which external addresses will be allowed 
to access the router’s remote management.

For security, restrict access to as few external 
IP addresses as practical:

To allow access from a single IP address on 

the Internet, select Only This Computer.

 

Enter the IP address that will be allowed 
access. 

To allow access from a range of IP addresses on the Internet, select IP Address 

Range. Enter a beginning and ending IP address to define the allowed range. 

To allow access from any IP address on the Internet, select Everyone. 

Specify the number of the port that will be used for accessing the router’s internal menus.

Access normally uses the standard HTTP service port 80. For greater security, you can 
enter a different port number. Choose a number between 1024 and 65535, but do not use 
the number of any common service port. The default is 8080, which is a common 
alternate for HTTP.

Click Apply to have your changes take effect.

When accessing your router from the Internet, type your router WAN IP address in your 
Internet browser address or location field, followed by a colon (:) and the custom port 
number. For example, if your external address is 134.177.0.123 and you use port number 
8080, enter:

In this case, you have to include http:// in the address.

Universal Plug and Play

Universal Plug and Play (UPnP) helps devices such as Internet appliances and computers 
access the network and connect to other devices as needed. UPnP devices can 
automatically discover the services from other registered UPnP devices on the network.