Netgear XAV1601 설치 가이드

Installation Guide

This symbol was placed in accordance with the European Union Directive 

2002/96 on the Waste Electrical and Electronic Equipment (the WEEE 

Directive). If disposed of within the European Union, this product should be 

treated and recycled in accordance with the laws of your jurisdiction 

implementing the WEEE Directive.

©2011 by NETGEAR, Inc. All rights reserved. NETGEAR, the NETGEAR logo, and 

Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, 

Inc. in the United States and/or other countries. Other brand and product names are 

trademarks or registered trademarks of their respective holders. Information is subject to 

change without notice. 

Power LED

• Solid green. The electrical power is on.
• Blinking green. The adapter is restarting or setting up 

security.

• Solid Amber.

 The adapter is in power saving mode.

• Off. There is no electrical power.

Ethernet 
LED

• Solid. The Ethernet port is linked.
• Off. There is no Ethernet connection.

Powerline LED

Power LED

Ethernet LED

Factory Reset

Security

Ethernet 

port

Filtered 
AC Socket

Technical Support

Thank you for selecting NETGEAR products. 
After installing your device, locate the serial number on the 
label of your product and use it to register your product at 

. Registration is required before 

you can use our telephone support service. Registration via our 
website is strongly recommended.
To access the XAV1601 utility, for product updates, and for 
Web support, go to 

.

GPL may be included in this product; to view the GPL license 
agreement, go to:

.

For complete DoC, please visit the NETGEAR EU Declarations of 
Conformity website at: 

.

  Package Contents

Warning: Do not press the Security/Power button on the 

Powerline adapter until installation is complete and the adapters are 
communicating with each other (indicated by the blinking Powerline 
LED). Pressing this button too soon can temporarily disable Powerline 
communication. If this should occur, use the 

Factory Reset button to 

return the Powerline adapter to its factory default settings. 

Powerline 
LED

• Solid. The adapter is connected to a Powerline 

network.

• Off. The adapter has not found any other compatible 

Powerline devices using the same encryption key.

Factory 
Reset 

Press the 

Factory Reset button for 1 second, then 

release to return the Powerline adapter to its factory 
default settings.

Security 
button

After you plug in your new AV adapter, press the

Security button for 2 seconds, then press the 

Security button on one of the other AV adapters in 
your existing network for 2 seconds. Both buttons 
must be pressed within 2 minutes.

 The 

Security button does not work in power 

saving mode, during which the Power LED blinks once 
every 3 seconds.

Filtered 
AC Socket

The filtered AC socket can remove some electrical 
noise which may affect powerline performance. Plug-
ging the power plugs of nearby devices into the fil-
tered AC socket may improve performance.

Powerline

AV+  200

Nano 

Ethernet

cable

Your adapters may look like one of these:

Products sold in

some locations

include a 

Resource CD.