Netgear WNR1500 - N300 Wireless Router With External Antennas 설치 가이드

Wait approximately 2 minutes

until your modem turns on.

If your modem has a battery backup,

first remove and reinsert the battery

before connecting your
modem to power.

Package Contents:

N300 Wireless Router

with External Antennas

Installation Guide

Power adapter

Ethernet cable

Step 1:

Unplug the power
to turn off your modem.

Step 2:

Connect one end of the blue
Ethernet cable to your modem,

and the other end to the Internet port
on your router.

Plug in, then turn on your modem.

Step 3:

Step 6:

Step 4:

Connect the power adapter to the

router, then plug it into an outlet.

If none of the LEDs turn on, make sure

the router is connected to a working outlet.

Wait until the Wireless LED turns
solid green.

Step 5:

Use another Ethernet cable to establish
a wired connection as shown in this diagram.

Optionally, connect wirelessly by using the

preset wireless security settings
located on the bottom label.

Open a browser.

If the Web page does not display,
close and re-open the browser
and enter

http://routerlogin.net

in the address bar, or check the

“Troubleshooting” section in

the User Guide.

Laptop or Desktop

Computer

N300 Wireless Router with External Antennas

Modem

or Cable

Internet

DSL

(not included)

Connect your computer
to the router.

N300 Wireless Router

WNR1500

with External Antennas