Netgear WNDR4300 – N750 Wireless Dual Band Gigabit Router 사용자 설명서

and registers your new IP address. If your host name is hostname, for example, you can 
reach your router at 

.

On the Advanced tab, select Advanced Setup > Dynamic DNS to display the following 
screen:



Register for an account with one of the Dynamic DNS service providers whose names 

appear in the Service Provider list. 

Select the Use a Dynamic DNS Service check box. 

Select the web address of your Dynamic DNS service provider. 

For example, for DynDNS.org, select www.dyndns.org.

Type the host name (or domain name) that your Dynamic DNS service provider gave you.

Type the user name for your Dynamic DNS account. This is the name that you use to log in 

to your account, not your host name.

Type the password (or key) for your Dynamic DNS account. 

If your Dynamic DNS provider allows the use of wildcards in resolving your URL, you can 

select the Use Wildcards check box to activate this feature. 

For example, the wildcard feature causes 

 to be aliased to the 

same IP address as yourhost.dyndns.org.

Click Apply to save your configuration.

Static routes provide additional routing information to your router. Typically, you do not need 
to add static routes. You have to configure static routes only for unusual cases such as 
multiple routers or multiple IP subnets on your network.

As an example of when a static route is needed, consider the following case:

Your primary Internet access is through a cable modem to an ISP.

You have an ISDN router on your home network for connecting to the company where 
you are employed. This router’s address on your LAN is 192.168.1.100.

Your company’s network address is 134.177.0.0.

When you first configured your router, two implicit static routes were created. A default route 
was created with your ISP as the gateway, and a second static route was created to your