Netgear WNDR4300 – N750 Wireless Dual Band Gigabit Router 사용자 설명서



Select Advanced > Setup > WAN Setup. 

In the MTU Size field, enter a value from 64 to 1500.

Click Apply to save the settings.

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host 
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).

The router is shipped preconfigured to use private IP addresses on the LAN side and to act 
as a DHCP server. The router’s default LAN IP configuration is:

LAN IP address. 192.168.1.1

Subnet mask. 255.255.255.0

These addresses are part of the designated private address range for use in private networks 
and are suitable for most applications. If your network requires a different IP addressing 
scheme, you can change these settings in the LAN Setup screen.

If you change the LAN IP address of the router, you are disconnected. 
To use the router menus, you must use a browser to connect to the 
new IP address and log in again.

1436

Used in PPTP environments or with VPN.

1400

Maximum size for AOL DSL.

576

Typical value to connect to dial up ISPs.