Netgear WAG511 - Dual Band Wireless PC Card - 802.11a/b/g 사용자 설명서
1-1
v4.0, March 2007
Chapter 1
Basic Setup
The WAG511 Wireless PC Card lets you connect a PC computer to wireless networks. It is
designed for PC computers running Microsoft Windows. For information about product features
and compatible NETGEAR products, please see the NETGEAR website at
designed for PC computers running Microsoft Windows. For information about product features
and compatible NETGEAR products, please see the NETGEAR website at
.
This chapter describes how to install your NETGEAR Dual Band Wireless PC Card 32-bit
CardBus WAG511 and set up basic wireless connectivity on your Wireless Local Area Network
(WLAN). Advanced wireless network settings are covered in
CardBus WAG511 and set up basic wireless connectivity on your Wireless Local Area Network
(WLAN). Advanced wireless network settings are covered in
in this manual.
What You Need Before You Begin
You must verify that your computer meets the minimum system requirements and identify the
wireless network settings of the wireless network where you will connect before you can set up
your wireless PC card and connect.
wireless network settings of the wireless network where you will connect before you can set up
your wireless PC card and connect.
Verify System Requirements
Before installing the WAG511 Wireless PC Card, make sure that these minimum requirements
have been met. You must have a computer with:
have been met. You must have a computer with:
•
A Pentium
®
300 MHz or higher compatible processor with an available CardBus slot.
•
A CD drive.
•
5 Mbytes of free hard disk space.
•
Microsoft Vista, Windows XP Home, XP Professional, or Windows 2000
Some versions of Windows may ask for the original Windows operating system installation
files to complete the installation of the WAG511 driver software.
files to complete the installation of the WAG511 driver software.