Netgear WAG511 - Dual Band Wireless PC Card - 802.11a/b/g 사용자 설명서

2-11

5. Select Create with Passphrase and enter the passphrase. The configuration utility will 

automatically generate the WEP keys.

If the passphrase method is not available in the other devices, you must manually enter the 
keys to match exactly what is in the access point and other 802.11b wireless devices.

6. To save your settings in a Profile, click Save Profile. 

7. Click Apply, and then click Close to exit the utility.

Advanced Security includes WPA/WPA2, WPA/WPA2-PSK, 802.1x, and Cisco LEAP.

To configure Advanced security:

1. Make sure the NETGEAR software is installed and the WAG511 Wireless PC Card is fully 

inserted in the CardBus slot in your computer.

2. Use the 

 icon to open the Smart Wireless Utility. The Settings tab page opens.

3. Enter the profile and Network Name (SSID).

Note: The characters are case sensitive. Be sure to use the same passphrase for all the 

wireless devices in the network.

Note: You will not get a wireless network connection unless the SSID that you enter 

exactly matches the SSID used by the access point