Netgear A6200 - 802.11ac WiFi USB Adapter - Dual Band 사용자 설명서

You can use the USB cable and USB adapter that came in the package to position the USB 
adapter for better wireless communication.

The connection speed can vary depending on the type of USB port on your computer, the 
capacity of the router or access point for the wireless network, and the type of Internet 
connection. You can view the throughput in the status bar at the bottom of the Smart Wizard 
screen.

If the throughput is 54 Mbps, you could be connected to an 802.11g network, or the 

wireless-N network could be set with WPA (TKIP) security.

When WPA (TKIP) security mode is configured on the router or access point, WiFi 
regulations allow the USB adapter to connect only at up to 54 Mbps. For a faster 
connection, configure the security for the router or access point as WPA2 or 
WPA + WPA2 mixed wireless security. The connection speed still depends on the 
wireless capacity of the router or access point.

If you do not have a USB 2.0 port on your computer, the throughput is limited to the 

14 Mbps of the older USB 1.1 standard.

Click the 

 icon to open NETGEAR genie. Then click the Other button to view the IP 

address.

IP address assignment can be lost if you upgraded your USB adapter software and did not 
reboot your computer. To correct this problem, either restart your computer, or connect to a 
different access point.