Netgear RBK50 – Orbi AC3000 Tri-band WiFi System 사용자 설명서
Supplemental Information
107
Orbi High-Performance
AC3000
Tri-band
WiFi
System
Factory Settings
You can return the router or the satellite to its factory settings. Use the end of a paper clip or
a similar object to press and hold the Reset button on the back of the router or satellite for at
least seven seconds. The router or satellite resets, and returns to the factory settings.
a similar object to press and hold the Reset button on the back of the router or satellite for at
least seven seconds. The router or satellite resets, and returns to the factory settings.
The following table shows the factory default settings for the router.
Table 3. Factory default settings for the router
Feature
Default Setting
Router login
User login URL
orbilogin.com
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
connection
connection
WAN MAC address
Use default hardware address
WAN MTU size
1500
Port speed
AutoSensing
Local network
(LAN)
(LAN)
LAN IP
192.168.1.1
Subnet mask
255.255.255.0
DHCP server
Enabled
DHCP range
192.168.1.2 to 192.168.1.254
DHCP starting IP address
192.168.1.2
DHCP ending IP address
192.168.1.254
DMZ
Disabled
Time zone
GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA
for NA
Time zone adjusted for daylight
saving time
saving time
Disabled
SNMP
Disabled
Firewall
Inbound (communications coming
in from the Internet)
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
out to the Internet)
Enabled (all)
Source MAC filtering
Disabled