Netgear WGT624v1 - 108 Mbps Wireless Firewall Router 참조 매뉴얼

Connecting the Router to the Internet

3-9

PPPoE Smart Wizard-Detected Option 

If the Setup Smart

Wizard discovers that your ISP uses PPPoE, you will see this menu:

 

•

Enter the Account Name, Domain Name, Login, and Password as provided by your ISP. These 
fields are case sensitive. The router will try to discover the domain automatically if you leave 
the Domain Name blank. Otherwise, you may need to enter it manually.

•

To change the login timeout, enter a new value in minutes. This determines how long the 
router keeps the Internet connection active after there is no Internet activity from the LAN. 
Entering a timeout value of zero means never log out.

Note: You no longer need to run the ISP’s login program on your PC in order to access the 
Internet. When you start an Internet application, your router will automatically log you in.

•

If you know that your ISP does not automatically transmit DNS addresses to the router during 
login, select “Use these DNS servers” and enter the IP address of your ISP’s Primary DNS 
Server. If a Secondary DNS Server address is available, enter it also.

Note: If you enter DNS addresses, restart your computers so that these settings take effect.

•

Click Apply to save your settings.

•

Click Test to verify that your Internet connection works. If the NETGEAR website does not 
appear within one minute, refer to 

.”