Netgear WGT624v1 - 108 Mbps Wireless Firewall Router 참조 매뉴얼

Wireless Configuration

4-9

8.

Configure and test your PCs for wireless connectivity.

Program the wireless adapter of your PCs to have the same SSID and channel that you 
configured in the router. Check that they have a wireless link and are able to obtain an IP 
address by DHCP from the firewall.

Once your PCs have basic wireless connectivity to the firewall, then you can configure the 
advanced wireless security functions of the firewall.

To restrict access based on MAC addresses, follow these steps:

1.

Log in to the WGT624 firewall at its default LAN address of 

 with its default 

user name of admin and default password of password, or using whatever LAN address and 
password you have set up.

2.

Click the Wireless Settings link in the main menu of the WGT624 firewall.

If you are configuring the firewall from a wireless PC and you change the 

firewall’s SSID, channel, or security settings, you will lose your wireless connection 
when you click on Apply. You must then change the wireless settings of your PC to 
match the firewall’s new settings.

When configuring the firewall from a wireless PC whose MAC address is not in 

the Trusted PC list, if you select Turn Access Control On, you will lose your wireless 
connection when you click on Apply. You must then access the wireless router from a 
wired PC or from a wireless PC which is on the access control list to make any further 
changes.