Netgear JR6150 - AC750 WiFi Router - 802.11ac Dual Band Gigabit 사용자 설명서

If the router does not save the changes you make in the router interface, check the following:

When entering configuration settings, always click the Apply button before moving to 
another screen or tab, or your changes are lost. 

Click the Refresh or Reload button in the web browser. The changes might have 
occurred, but the old settings might be in the web browser’s cache.

If you are having trouble connecting wirelessly to the router, check the following to try to 
isolate the problem: 

Does the wireless device or computer that you are using find your wireless network?

If not, check the Wireless LEDs on the front of the router. They should be lit. If they are 
not, you can press the Wireless On/Off button on the front of the router to turn the 
router’s wireless radios back on.

If you disabled the router’s SSID broadcast, then your wireless network is hidden and 
does not show up in your wireless client’s scanning list. By default, SSID broadcast is 
enabled.

Does your wireless device support the security that you are using for your wireless 
network? For example, does your wireless device support WPA2 security? If not, then 
you must change the security of the router to match the security that is supported by your 
wireless device. For more information, see 

25.

If your wireless device does not support WPA2 security, you might want to consider 
upgrading your wireless device to a newer model.

If you want to view the wireless settings for the router, use an Ethernet cable to connect a 
computer to a LAN port on the router. Then log in to the router, and select BASIC > 
Wireless. For more information, see 

25. 

If your wireless device finds your network, but the signal strength is weak, check these 
conditions:

Is your router too far from your computer, or too close? Place your computer near the 
router, but at least 6 feet (2 meters) away, and see whether the signal strength improves.