Netgear WPN824N - RangeMax™ N150 Wireless Router 설치 가이드

© 2009 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of 

NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or 

registered trademarks of their respective holders. Information is subject to change without notice. 

1.  In the address field of your browser, type http://www.routerlogin.net and click Enter. 

2.  Enter the router User Name admin and 

default Password password to open your 
router’s main settings page

. 

3.  When the main settings page opens, you 

will be asked if you want to “Check for 
Update.” Click Cancel. You can always 
check for new firmware later after you are 
connected to the Internet. 

4.  Select the first menu item on the left: Setup Wizard. Make sure Yes is selected. Then 

click Next and follow the prompts to complete the Setup Wizard.

When the Setup Wizard has completed detecting your connection, the Basic Settings 
page displays showing your settings. You are now connected to the Internet.

Note: If your ISP requires that you enter a User Name or Password, you will be 
prompted to enter this information. If you do not have this information, contact your 
ISP. 

After connecting to the Internet, you can check for firmware updates by selecting Router 
Upgrade and following the on-screen prompts.

You should set up a secure wireless network. Once your router security is established, 
your wireless laptops, gaming devices (such as Wii® or PlayStation 3® with wireless), or 
other wireless equipment can safely and securely connect to the Internet.

1.  From the main menu page, select Wireless Settings.* 

2.  First, name your wireless network. Choose a name that is easy for you to remember. 

You might want to write it down here: ___________________________ (the default 
name is NETGEAR).

3.  Select your security method. NETGEAR recommends WPA2-PSK (AES). Then, enter a 

Passphrase. In the example, we entered HomeNetwork. You might want to write your 
Passphrase down here:________________________.

Note: Both your Network Name (SSID) and Passphrase are case sensitive. Your 
Network name, Security method and Passphrase must be the same on all the wireless 
devices connected to your router.

4.  Click Apply and close your browser.

*Your router menu may display different or additional features not shown in this image.

 Enter your wireless information here:

 Wireless Network Name (SSID) ________________________________

 Wireless Security Passphrase __________________________________

 If you don’t remember your Passphrase, type http://www.routerlogin.net into  your 
browser and log in by entering your User Name admin and Password  (default is 
password). Then, select Wireless Settings to retrieve your  Passphrase.

You can add wireless computers and other equipment to your wireless network: 

1.  Open the wireless software that manages your wireless connections on the wireless 

device (iPhone®, laptop computer, gaming device) that you want to connect to your 
router. 

2.  The wireless software will scan for all wireless networks in your area. Look for your 

network—the one you named when you set up your router. Select it.

3.  If you set up security, you will be prompted for a Passphrase or network key. Enter the 

Passphrase you selected and click Connect. 

If your wireless device supports WPS (WiFi Protected Setup)—NETGEAR calls this method 
Push 'N' Connect—you might be prompted to press a WPS button on the router instead of 
entering a Passphrase. Then:

1.  Press and hold the WPS button on the router’s dome for 5 seconds. 

2.  Within 2 minutes, follow the wireless software instructions on the wireless device to 

complete the WPS process. 

The device will then be connected to your router. Repeat this process to add other 
wireless devices.