Netgear WNR2000v3 - N300 Wireless Router 설치 가이드

Wait approximately 2 minutes

until your modem turns on.

If your modem has a battery backup,

first remove and reinsert the battery

before connecting your
modem to power.

Package Contents:

N300 Wireless Router

WNR2000v3

Installation Guide

Power adapter

Ethernet cable

Step 1:

Unplug the power
to turn off your modem.

Step 2:

Connect one end of the yellow

Ethernet cable ( ) to your modem,
and the other end to the Internet port
on your router.

Plug in, then turn on your modem.

Step 3:

Step 6:

Step 4:

Connect the power adapter to the

router, then plug it into an outlet.

If none of the LEDs turn on, make sure that

the Power On/Off button is in the ON position

(pushed in).

Wait until the wireless LED turns
solid green.

Step 5:

Connect the router

to your computer.

Use another Ethernet cable to establish
a wired connection as shown in this diagram.

Optionally, connect wirelessly by using the

preset wireless security settings
located on the bottom label.

Open a browser.

If the Web page does not display,
close and re-open the browser

and enter

http://routerlogin.net

the address bar, or check the

“Troubleshooting” section on

the back of this installation guide.

Laptop or Desktop

Computer

N E T G E A R

N300 Wireless Router

Modem

or Cable

Internet

DSL

N300 Wireless Router

(not included)